Products

Products

SNIPER Fiber Laser Plate Cutting

SNIPER Fiber Laser Plate Cutting
SNIPER Fiber Laser Plate Cutting

SNIPER Fiber Laser Plate Cutting

Specification:

  • Model: Single Table
  • Laser Power: 1,000 - 8,000 Watt
  • Working Area: 1530x3050 mm. Up to (3000x12000 mm.)
  • Material: All Metal (Cabon Steel, Stainless Steel, Aluminium, Brass, Copper etc.)
  • Cutting Thickness: 0.4 - 50 mm.
  • Repeated Positioning Accuracy: ±0.03 mm.
  • Running Speed: 100 m./min.

SNIPER Iron work Combined Punching and Shearing Machine

SNIPER Iron work Combined Punching and Shearing Machine
SNIPER Iron work Combined Punching and Shearing Machine

SNIPER Iron work Combined Punching and Shearing Machine

Specification:

  • Multi-function hydraulic combined puching and shearing funtions on the plate, square steel, round steel, channal steel, Angle steel, i-steel, etc all kinds of steel shear, pun ching, is the first ch oice for various steel mass blanking machine tools. And below 500 mm length for sheet metal bending into line The machine of every part in safety, function, maitenance and performance meet the highest quality requirements.

SNIPER Column and Boom CZ Series

SNIPER Column and Boom CZ Series
SNIPER Column and Boom CZ Series

SNIPER Column and Boom CZ Series

Specification:

  • It Consists of trolley traveller, turning oversystem.locking mechanism, column, beam, lift system, control system, welding system.
  • Match with welding turning roller, welding positioner, circular seam weld for tank and big diameter pipe by inner and outer.
  • May work with single double wire submerged arc welding machine, MIG/MAG welding head.
  • Realize auto welding, high efficiency, low cost, high quality.

SNIPER Turning Roll KT-Series

SNIPER Turning Roll KT-Series
SNIPER Turning Roll KT-Series

SNIPER Turning Roll KT-Series

Specification:

  • Drive work piece turn over as per preset speed
  • Mainly suitable for assembling and welding column workpiece, adjust the height of drive roll and driven roll, assemble and weld cone and and subsection different turning workpiece
  • Change two wheels center distance by adjusting bolt position for various diameter workpiece
  • Maximum Twist drill dia: 28 mm.
  • Maximum Cutting depth: 50 mm.

SNIPER Turning Roll ZT-Series

SNIPER Turning Roll ZT-Series
SNIPER Turning Roll ZT-Series

SNIPER Turning Roll ZT-Series

Specification:

  • Drive workpiece turn over as per preset speed
  • Mainly suitable for assembling and welding column workpiece, adjust the height of drive roll and driven roll ,assemble and weld cone and subsection workpiece different turning
  • Automatic adjust opening angle of turning roll as per various diameter

SNIPER Welding Carriage ED100C

SNIPER Welding Carriage ED100C
SNIPER Welding Carriage ED100C

SNIPER Welding Carriage ED100C

Specification:

  • Power: AC220V, 50/60Hz
  • Torch Adjust: Up, Down 70 mm. / Left, Right 150 mm.
  • Operation Angle: 360°
  • Stable travel on the rail, it comes high quality welding
  • Multi welder such as Butt-Fillet and Down­Horizontal-Vertical up positions with weaving functions
  • Flexible rail 1.8 meter standard lenght with 10 magnets

SNIPER Welding Carriage ED-BL5

SNIPER Welding Carriage ED-BL5
SNIPER Welding Carriage ED-BL5

SNIPER Welding Carriage ED-BL5

Specification:

  • ED-BL5 carriage is suitable for intermittent or continuous horizontal fillet welding.
  • Magnetic handle designed makes it easy to clear iron slag and move the carriage.
  • It has arc extinguishing device, and its time adjust range is 0~5 seconds.
  • It has strong permanent magnet to prevent leaving from the welding line.
  • It is small, light and easy to carry and operate; non-skilled welding personnel can also use it.

SNIPER Welding Carriage AMP-150

SNIPER Welding Carriage AMP-150
SNIPER Welding Carriage AMP-150

SNIPER Welding Carriage AMP-150

Specification:

  • Wall Thickness: 4-60 mm.
  • Pipe Size: 168 (6.25") and Larger
  • Weaving Width: 0-30 mm.
  • Adjustment Height of Welding Torch: Stroke 40 mm.
  • Weaving System: Left and Right 0-90 mm.
  • Material: Carbon steel, alloy steel, low temperature steel, etc.
  • Welding: Applicable to all kinds of pipe welding, like pipe- pipe welds, pipe-bend welds, pipe-flange welds, flange-flange welds, flange-bend welds, etc.

SNIPER Hydraulic Pressbrake WAD Series

SNIPER Hydraulic Pressbrake WAD Series
SNIPER Hydraulic Pressbrake WAD Series

SNIPER Hydraulic Pressbrake WAD Series

Specification:

  • Sprayed with anti-rust treatment
  • Adopt CNC three-dimensional machining
  • Y1 and Y2 axes control
  • Quiet speed waiting and fast down
  • Low noise during pressing and return
  • 60% less energy consumption
  • Stable oil temperature
  • More technical innovations
  • Easy to operate
  • High-frequency hydraulic control technology

SNIPER NC HYDRAULIC SHEAR MACHINE

SNIPER NC HYDRAULIC SHEAR MACHINE
SNIPER NC HYDRAULIC SHEAR MACHINE

SNIPER NC HYDRAULIC SHEAR MACHINE

Specification:

  • All steel welded structure, vibrating treatment of aging for removal of internal stress. With good rigidly and stabillity.
  • Using precision slide rail space. The shearing quality is good.
  • Rectangular blade and the four blades can all be used. The life of the blead is long.